The 4227A Series™ internal gear pump is the ideal solution for soaps & surfactants, acids & caustics, and more because of its stainless steel construction for corrosion resistance over a wider pH range. It can handle flow rates up to 320 GPM (73 m³/h).
Features & Benefits
- All stainless steel construction, for corrosion resistance over a wider pH range
- Non-galling gear materials available for handling thin liquid applications
- Integral jacket chambers in the bracket and head surround the seal and pump internals to maintain a constant temperature, for rapid & efficient heating, or using steam, hot oil or water
Capacity
to 320 GPM
to 73 m³/h
Viscosity
28 to 2,000,000 SSU
1 to 440,000 cSt
Pressure
to 150 PSI
to 10 Bar
Temperature
-120 to +500 °F
-84 to +260 °C
Options
Porting
Right Angle (90°) (Rotatable Casing), H-Q
Opposite (180°) (Rotatable Casing), QS
Flanged (ASME / ANSI)
Drives
R Offset Gear Reducer Drive
P Purchased Gear Reducer Drive
D Direct-Mounted Drive, H-HL
V Drive | V-Belt Drive
Mounting
Foot Mount
Sealing
Component Mechanical Seal
Cartridge Mechanical Seal
Cartridge Triple Lip Seal
Specifications
| Model | Standard Port Size | Nominal Pump Rating GPM | Nominal Pump Rating m³/h | Maximum RPM | Maximum Pressure PSI | Maximum Pressure BAR |
|---|---|---|---|---|---|---|
| H4227A | 1.5 | 10 | 2.3 | 1150 | 150 | 10 |
| HL4227A | 1.5 | 20 | 4.5 | 1150 | 150 | 10 |
| K4227A | 2 | 65 | 11 | 520 | 150 | 10 |
| KK4227A | 2 | 65 | 15 | 520 | 150 | 10 |
| LQ4227A | 2.5 | 90 | 20 | 420 | 150 | 10 |
| LL4227A | 3 | 110 | 25 | 420 | 150 | 10 |
| LS4227A | 3 | 160 | 36 | 520 | 150 | 10 |
| Q4227A | 4 | 200 | 45 | 350 | 150 | 10 |
| QS4227A | 6 | 320 | 73 | 350 | 150 | 10 |
Select model for more detailed information:
Videos
TSM / Catalog / Flyers / Brochures
-
REPAIR RESOURCES
Quick Tip #01 - Setting End Clearance on a Viking Pump Universal Seal Pump Quick Tip #08 | PTFE Mechanical Seal Replacement How to Use a Thrust Bearing Locknut Tool Viking Pump Universal Seal Series with Stuffing Box Component Seals Repair Kit Installation Quick Tip #02 - Install Mechanical Seal into Stuffing Box in Viking Pump Universal Seal Pump
-
DRAWINGS
H-HL with Jacketed Head - 1.5" Class 150 ANSI RH/LH PDF
STEP
H-HL with Relief Valve - 1.5" Class 125 ANSI RH/LH PDF
K-KK with Plain Head - 2" Class 150 ANSI RH/LH PDF
K-KK with Plain Head - 3" Class 125 ANSI RH PDF
K-KK with Relief Valve - 2" Class 150 ANSI RH/LH PDF
STEP
L with Jacketed Relief Valve - 3" Class 125 ANSI RH PDF
STEP
LL with Jacketed Relief Valve - 3" Class 125 ANSI RH PDF
STEP
LL with Plain Head - 3" Class 125 ANSI RH/LH PDF
STEP
LL with Relief Valve - 3" Class 125 ANSI RH/LH PDF
STEP
LQ with Plain Head - 2.5" Class 125 ANSI RH/LH PDF
STEP
LQ with Relief Valve - 2.5" Class 125 ANSI RH/LH PDF
STEP
LS with Plain Head - 3" Class 125 ANSI RH/LH PDF
STEP
LS with Relief Valve - 3" Class 125 ANSI RH/LH PDF
STEP
Q with Jacketed Head - 4" Class 125 ANSI RH/LH PDF
STEP
Q with Jacketed Relief Valve - 4" Class 125 ANSI RH PDF
STEP
Q with Relief Valve - 4" Class 125 ANSI RH/LH PDF
STEP
QS with Jacketed Head - 6" Class 125 ANSI Opposite PDF
QS with Jacketed Relief Valve - 6" Class 125 ANSI Opposite PDF
STEP
QS with Relief Valve - 6" Class 125 ANSI Opposite PDF
STEP