The 324E Series™ internal gear electric heated pump is the perfect solution for your asphalt needs because it warms the asphalt within the pump prior to startup. It can hold capacities up to 1600 GPM (364 m³/h).
Features & Benefits
- Reduced installation & maintenance expense
- Lower installation costs in remote locations when steam or hot oil is not available or requires long piping runs
- Provides expansion flexibility
- Eliminates the hot oil or steam system
- Simplified service due to the lack of hot oil or steam connections
- Reduce energy costs
- Eliminates heat loss through piping
- Reduces environmental costs by eliminating hot oil or steam piping
to 1600 GPM
to 364 m³/h
28 to 2,000,000 SSU
1 to 440,000 cSt
to 200 PSI
to 14 Bar
-60 to +450 °F
-50 to +230 °C
|Model||Standard Port Size (In / mm)||Nominal Pump Rating GPM||Nominal Pump Rating m³/h||Maximum RPM||Maximum Pressure PSI||Maximum Pressure BAR|
Clean asphalt contains no fillers and is an oil based liquid. It is primarily used in paving roads, waterproofing liquids, and paints. Typically they are handled at elevated temperatures to reduce the viscosity of the asphalt. The pump needs a source of heat like jacketing or electric heat to prevent the product from solidifying in the pump.
- Cast iron
- Leak prevention with O-Pro® Cartridge seal
- Capacities to 280 GPM
- Jacketed for steam/oil heating prior to pump startup
Emulsions are asphalt suspended in a mixture with water or other liquids. This is done to ease the application of the asphalt. Uses would be crack filling, coating roadways, or waterproofing. These emulsions are shear sensitive and must be handled with care.
- Cast iron
- Jacketed for steam/oil heating prior to startup
- Mechanical seal options
- Capacities to 500 GPM
Filled asphalts contain particulate used in the liquids’ end applications. Examples of this would be roofing materials and hot mix plants. Typically they are handled at elevated temperatures to reduce the viscosity of the asphalt mixture. The pump needs a source of heat like jacketing or electric heat to prevent the product from solidifying in the pump.