To begin, remove the stainless-steel window guards from the bracket.
Next, bend up the tang of the lock washer.
Place a brass or hardwood bar into the port opening to keep the pump from turning.
Loosen and remove the locknut. Remove and discard the lock washer.
Loosen the bearing housing set screws.
Loosen and remove the bearing housing. 
Remove the bearing spacer collar. The collar may have come out with the bearing housing.
Remove the half round rings.
Loosen and remove the head cap screws.

Welcome, in this video we will guide you through the conversion from packing to an O-Pro® Barrier seal in Viking pumps with the U-Plus™ bracket. This video applies to these pump models…

Before you begin, please consult the appropriate technical service manual for safety information. A copy of the latest revision can be found on our website at vikingpump.com.

To begin, bend up the tang of the lock washer.

Welcome, in this video we will guide you through the replacement of O-Pro® Barrier seal o-rings in Viking pumps with the U-Plus™ bracket. This video applies to these pump models…
Before you begin, please consult the appropriate technical service manual for safety information. A copy of the latest revision can be found on our website at vikingpump.com.
To begin, bend up the tang of the lock washer.
Place a brass or hardwood bar into the port opening to keep the pump from turning.
Loosen and remove the locknut. Remove and discard the lock washer.