Welcome!  In this video we will guide you through the disassembly and reassembly of Viking Pump’s 893, 895, and 897 Series™ mag drive internal gear pumps.

This video applies to these pump models: GG893, HJ893, HL893, AS893, AK893, AL893, GG895, HJ895, HL895, AS895, AK895, AL895, GG897, HJ897, HL897, AS897, AK897, AL897

Welcome. In this Quick Tip video, we will show you how to switch between flat gaskets or o-rings in Viking pumps with the ProPort™ casing. The bracket, head, and ports will each have a flat gasket or o-ring for sealing. Depending on application requirements, users can switch between these elastomers as needed. Before you begin please consult the appropriate technical service manual for safety information. A copy of the latest revision can be found at vikingpump.com.

Welcome, in this video we will guide you through the conversion from packing to Viking Pump’s O-Pro® Cartridge seal in pumps with the U-Plus™ bracket. This video applies to these pump models… Before you begin, please consult the appropriate technical service manual for safety information. A copy of the latest revision can be found on our website at vikingpump.com. To begin, remove the stainless-steel window guards from the bracket. Next, bend up the tang of the lock washer. Place a brass or hardwood bar into the port opening to keep the pump from turning. Loosen and remove the locknut.

Welcome, in this video we will guide you through the replacement of o-rings in an O-Pro® Cartridge seal for pumps with the U-Plus™ bracket. This video applies to these pump models… Before you begin, please consult the appropriate technical service manual for safety information. A copy of the latest revision can be found on our website at vikingpump.com. To begin, bend up the tang of the lock washer. Place a brass or hardwood bar into the port opening to keep the pump from turning. Loosen and remove the locknut. Remove and discard the lock washer. Loosen the bearing housing set screws.

Welcome, in this video we will guide you through the conversion from packing to Viking Pump’s O-Pro® Guard seal in pumps with the U-Plus™ bracket. This video applies to these pump models… 
Before you begin, please consult the appropriate technical service manual for safety information. A copy of the latest revision can be found on our website at vikingpump.com. 
To begin, remove the stainless-steel window guards from the bracket. 
Next, bend up the tang of the lock washer. 
Place a brass or hardwood bar into the port opening to keep the pump from turning.