Quick Tip: Swap between fiber gaskets and o-rings with the ProPort™ casing

Welcome. In this Quick Tip video, we will show you how to switch between flat gaskets or o-rings in Viking pumps with the ProPort™ casing. The bracket, head, and ports will each have a flat gasket or o-ring for sealing. Depending on application requirements, users can switch between these elastomers as needed. Before you begin please consult the appropriate technical service manual for safety information. A copy of the latest revision can be found at vikingpump.com.

Converting a Pump from Packing to O-Pro® Cartridge Seal in Pumps with a U-Plus™ Bracket

Welcome, in this video we will guide you through the conversion from packing to Viking Pump’s O-Pro® Cartridge seal in pumps with the U-Plus™ bracket. This video applies to these pump models… Before you begin, please consult the appropriate technical service manual for safety information. A copy of the latest revision can be found on our website at vikingpump.com. To begin, remove the stainless-steel window guards from the bracket. Next, bend up the tang of the lock washer. Place a brass or hardwood bar into the port opening to keep the pump from turning. Loosen and remove the locknut.

Subscribe to Internal Gear Repair