La pompa a ingranaggi interni serie 1227A™ con Tenuta O-Pro® è la soluzione perfetta per melassa, impasti zuccherini, sciroppo di mais e altro ancora grazie alla sua tenuta affidabile e alla facile manutenzione. È in grado di gestire portate da 6 a 320 GPM (da 1,4 a 73 m³/h).
Caratteristiche e Vantaggi
- Struttura in Acciaio Inox 316 per la compatibilità con i fluidi di processo
- O-Pro® Guard offre una soluzione di tenuta robusta per molti mercati
- Il design ricostruibile di O-Pro® Guard garantisce tempi di fermo minimi e costi contenuti
- Le camere con incamiciatura integrate nella staffa e nella testa consentono alle pompe di mantenere una temperatura costante e un flusso di prodotto uniforme
Capacità
6 a 320 GPM
1.4 a 73 m³/h
Viscosità
28 a 75,000 SSU
1 a 17,000 cSt
Pressione
a 150 PSI
a 10 Bar
Temperatura
-15 a +350 °F
-25 a +175 °C
Opzioni
Attacchi
Angolo destro (90°) (corpo girevole), H-Q
Opposti (180°) (corpo girevole), QS
Flangiati (ASME/ANSI)
Trasmissione
R Trasmissione con riduttore a ingranaggi sfalsati
P Trasmissione con riduttore a ingranaggi acquisito
V Drive | Azionamento con cinghia trapezoidale
Montaggio
Montaggio su piedini
Tenuta
Tenuta O-Pro® Guard
Specifiche
| Model | Standard Port Size | Nominal Pump Rating (GPM) | Nominal Pump Rating (m3/h) | Maximum RPM | Maximum Pressure PSI | Maximum Pressure BAR |
|---|---|---|---|---|---|---|
| H1227A | 1.5 | 6 | 1.4 | 760 | 150 | 10 |
| HL1227A | 1.5 | 13 | 3 | 760 | 150 | 10 |
| K1227A | 2 | 50 | 11 | 520 | 150 | 10 |
| KK1227A | 2 | 65 | 15 | 520 | 150 | 10 |
| LQ1227A | 2.5 | 100 | 23 | 520 | 150 | 10 |
| LL1227A | 3 | 135 | 31 | 520 | 150 | 10 |
| LS1227A | 3 | 160 | 36 | 520 | 150 | 10 |
| Q1227A | 4 | 200 | 45 | 350 | 150 | 10 |
| QS1227A | 6 | 320 | 73 | 350 | 150 | 10 |
Photos
Videos
TSM / Catalog / Flyers / Brochures
-
REPAIR RESOURCES
Quick Tip #01 - Setting End Clearance on a Viking Pump Universal Seal Pump O-ring Replacement: O-Pro® Guard Seal How to Use a Thrust Bearing Locknut Tool Viking Pump Universal Seal Series with Stuffing Box Component Seals Repair Kit Installation Quick Tip #02 - Install Mechanical Seal into Stuffing Box in Viking Pump Universal Seal Pump Viking Pump: Converting to the O-Pro® Guard Seal
-
DRAWINGS
H-HL with Jacketed Head - 1.5" Class 150 ANSI RH/LH PDF
STEP
K-KK with Plain Head - 2" Class 150 ANSI RH/LH PDF
L with Jacketed Relief Valve - 3" Class 125 ANSI RH PDF
STEP
LL with Jacketed Relief Valve - 3" Class 125 ANSI RH PDF
STEP
LL with Plain Head - 3" Class 125 ANSI RH/LH PDF
STEP
LL with Relief Valve - 3" Class 125 ANSI RH/LH PDF
STEP
LQ with Jacketed Relief Valve - 2.5" Class 125 ANSI RH PDF
STEP
LQ with Plain Head - 2.5" Class 125 ANSI RH/LH PDF
STEP
LQ with Relief Valve - 2.5" Class 125 ANSI RH/LH PDF
STEP
LS with Plain Head - 3" Class 125 ANSI RH/LH PDF
STEP
LS with Relief Valve - 3" Class 125 ANSI RH/LH PDF
STEP
Q with Jacketed Head - 4" Class 125 ANSI RH/LH PDF
STEP
Q with Jacketed Relief Valve - 4" Class 125 ANSI RH PDF
STEP
Q with Relief Valve - 4" Class 125 ANSI RH/LH PDF
STEP
QS with Jacketed Head - 6" Class 125 ANSI Opposite PDF
STEP
QS with Jacketed Relief Valve - 6" Class 125 ANSI Opposite PDF
STEP
QS with Relief Valve - 6" Class 125 ANSI Opposite PDF
STEP