In this video we will guide you through the conversion from a behind the rotor seal to a component mechanical stuffing box seal in Viking Pump’s stainless-steel pumps – with U-Plus™ bracket and ProPort™ casing. 

This video applies to these pump models:
H4127C, HL4127C, K4127C, KK4127C, L4127C, LL4127C, H4227C, HL4227C, K4227C, KK4227C, L4227C, LL4227C

In this video we will guide you through the conversion from a behind the rotor seal to a component mechanical stuffing box seal in Viking Pump's stainless-steel pumps - with U-Plus™ bracket and ProPort™ casing.
This video applies to these pump models:
H4127C, HL4127C, K4127C, KK4127C, L4127C, LL4127C, H4227C, HL4227C, K4227C, KK4227C, L4227C, LL4227C

To begin, remove the stainless-steel window guards from the bracket.

Next, bend up the tang of the lock washer.

Place a brass or hardwood bar into the port opening to keep the pump from turning.

Viking Pump has evolved their flagship products. These are stainless steel pumps like you've never seen before. Modularity and customization are at the core of these products.

The new U-Plus™ bracket utilizes any of Viking Pump's cartridge or component mechanical seals, packing, and Viking Pump's own O-Pro® seals.

In a previous Pump Report Chad discussed the motors used to power pumps. But how do you connect a pump to that motor? And what if you want to run the pump slower than motor speed? In this episode Chad talks about drives and their related equipment. 

The term “drive” is used to describe the ancillary equipment used to mount and power a pump. This includes the motor, which we’d already discussed, but can also include a baseplate, coupling, guard, reducer, and more.