La pompe à engrenages internes 1127A Series™ avec la technologie O-Pro® Seal est la solution parfaite pour le beurre d'arachide, les peintures & ; les encres, les huiles comestibles, et plus encore grce à son étanchéité fiable et à sa facilité d'entretien. Elle peut traiter des débits de 6 à 320 GPM (1,4 à 73 m³/h).
Caractéristiques et Avantages
- Construction en acier inoxydable 316 pour une compatibilité avec les fluides de traitement
- O-Pro® Guard offre une solution d'étanchéité robuste pour de nombreux marchés
- La conception reconstructible de l'O-Pro® Guard offre un temps d'arrêt minimal et un faible coût
Capacité
6 à 320 GPM
1.4 à 73 m³/h
Viscosité
28 à 7,500* SSU
1 à 1,700* cSt
Pression
à 150 PSI
à 10 Bar
Température
-15 à +225 °F
-25 à +105 °C
Options
Raccords
Angle droit (90°) (corps rotatif), H-Q
Opposé (180°) (corps rotatif), QS
À bride (ASME/ANSI)
Entraînements
Entraînement réducteur déporté R
Entraînement réducteur acheté P
Entraînement V | Entraînement par courroie en V
Montage
Pose sur pied
Étanchéité
Joint O-Pro® Guard
Spécifications
| Modèle | Taille de l'orifice standard | Capacité nominale de la pompe (GPM) | Capacité nominale de la pompe (m3/h) | RPM maximale | Pression maximale PSI | Pression maximale BAR |
|---|---|---|---|---|---|---|
| H1127A | 1.5 | 6 | 1.4 | 760 | 150 | 10 |
| HL1127A | 1.5 | 13 | 3 | 760 | 150 | 10 |
| K1127A | 2 | 50 | 11 | 520 | 150 | 10 |
| KK1127A | 2 | 65 | 15 | 520 | 150 | 10 |
| LQ1127A | 2.5 | 100 | 23 | 520 | 150 | 10 |
| LL1127A | 3 | 135 | 31 | 520 | 150 | 10 |
| LS1127A | 3 | 160 | 36 | 520 | 150 | 10 |
| Q1127A | 4 | 200 | 45 | 350 | 150 | 10 |
| QS1127A | 6 | 320 | 73 | 350 | 150 | 10 |
Select model for more detailed information:
Photos
Videos
TSM / Catalog / Flyers / Brochures
Technical Service Manuals
Catalog Sections
Product Flyers
-
REPAIR RESOURCES
Quick Tip #01 - Setting End Clearance on a Viking Pump Universal Seal Pump O-ring Replacement: O-Pro® Guard Seal How to Use a Thrust Bearing Locknut Tool Viking Pump Universal Seal Series with Stuffing Box Component Seals Repair Kit Installation Quick Tip #02 - Install Mechanical Seal into Stuffing Box in Viking Pump Universal Seal Pump Viking Pump: Converting to the O-Pro® Guard Seal
-
DRAWINGS
LL with Relief Valve - 3" Class 125 ANSI RH PDF
STEP
LQ with Plain Head - 2.5" Class 125 ANSI RH/LH PDF
STEP
LS with Plain Head - 3" Class 125 ANSI RH/LH PDF
STEP
QS with Plain Head - 4" Class 125 ANSI RH/LH PDF
STEP
QS with Plain Head - 6" Class 125 ANSI Opposite PDF
STEP
QS with Relief Valve - 6" Class 150 ANSI Opposite PDF
STEP
H-HL with Relief Valve - 1.5" Class 125/150 ANSI RH/LH PDF
STEP
LS with Relief Valve - 3" Class 125 ANSI RH PDF
STEP
H-HL with Plain Head - 1.5" Class 150 ANSI RH/LH PDF
STEP
K-KK with Plain Head - 2" Class 150 RH/LH PDF
K-KK with Relief Valve - 2" Class 150 RH/LH PDF
STEP
LQ with Relief Valve - 2.5" Class 125 ANSI RH/LH PDF
STEP
LL with Plain Head - 3" Class 125 ANSI RH/LH PDF
STEP
Q with Relief Valve - 4" Class 150 ANSI RH/LH with Studs and Bolts PDF
STEP
Video
Cedar Falls, Iowa: Where Viking Pump Has Built Quality for Over a Century