La bomba de engranaje interno 1127A Series™ con tecnología O-Pro® Seal es la solución perfecta para mantequilla de cacahuete, pinturas y tintas, aceites comestibles y mucho más, gracias a su sellado fiable y su fácil mantenimiento. Puede manejar caudales de 6 a 320 GPM (1,4 a 73 m³/h).
Características y ventajas
- Construcción en acero inoxidable 316 para compatibilidad con fluidos de proceso
- Sello O-Pro® Guard proporciona una solución de sellado robusta para muchos mercados
- El diseño reconstruible de O-Pro® Guard ofrece un tiempo de inactividad mínimo y un bajo coste
Capacidad
6 a 320 GPM
1.4 a 73 m³/h
Viscosidad
28 a 7,500* SSU
1 a 1,700* cSt
Presión
a 150 PSI
a 10 Bar
Temperatura
-15 a +225 °F
-25 a +105 °C
Opciones
Puertos
Ángulo derecho (90°) (carcasa giratoria), H-Q
Opuesto (180°) (carcasa giratoria), QS
Embridada (ASME/ANSI)
Transmisores
Reductor motriz R de engranaje con compensación
Reductor motriz P de engranaje adquirido
Transmisor V | Transmisor de correa V
Montaje
Montaje de pie
Sellado
Sello O-Pro® Guard
Especificaciones
| Modelo | Tamaño de puerto estándar | Capacidad nominal de la bomba (GPM) | Capacidad nominal de la bomba (m³/h) | RPM máximas | Presión máxima PSI | Presión máxima BAR |
|---|---|---|---|---|---|---|
| H1127A | 1.5 | 6 | 1.4 | 760 | 150 | 10 |
| HL1127A | 1.5 | 13 | 3 | 760 | 150 | 10 |
| K1127A | 2 | 50 | 11 | 520 | 150 | 10 |
| KK1127A | 2 | 65 | 15 | 520 | 150 | 10 |
| LQ1127A | 2.5 | 100 | 23 | 520 | 150 | 10 |
| LL1127A | 3 | 135 | 31 | 520 | 150 | 10 |
| LS1127A | 3 | 160 | 36 | 520 | 150 | 10 |
| Q1127A | 4 | 200 | 45 | 350 | 150 | 10 |
| QS1127A | 6 | 320 | 73 | 350 | 150 | 10 |
Photos
Videos
TSM / Catalog / Flyers / Brochures
-
REPAIR RESOURCES
Quick Tip #01 - Setting End Clearance on a Viking Pump Universal Seal Pump O-ring Replacement: O-Pro® Guard Seal How to Use a Thrust Bearing Locknut Tool Viking Pump Universal Seal Series with Stuffing Box Component Seals Repair Kit Installation Quick Tip #02 - Install Mechanical Seal into Stuffing Box in Viking Pump Universal Seal Pump Viking Pump: Converting to the O-Pro® Guard Seal
-
DRAWINGS
H-HL with Plain Head - 1.5" Class 150 ANSI RH/LH PDF
STEP
H-HL with RV and ProPort Casing - DIN 40 PN16 Opposite PDF
STEP
K-KK with Plain Head - 2" Class 150 RH/LH PDF
K-KK with Relief Valve - 2" Class 150 RH/LH PDF
STEP
LL with Plain Head - 3" Class 125 ANSI RH/LH PDF
STEP
LL with Relief Valve - 3" Class 125 ANSI RH PDF
STEP
LQ with Plain Head - 2.5" Class 125 ANSI RH/LH PDF
STEP
LQ with Relief Valve - 2.5" Class 125 ANSI RH/LH PDF
STEP
LS with Plain Head - 3" Class 125 ANSI RH/LH PDF
STEP
LS with Relief Valve - 3" Class 125 ANSI RH PDF
STEP
Q with Relief Valve - 4" Class 150 ANSI RH/LH with Studs and Bolts PDF
STEP
QS with Plain Head - 4" Class 125 ANSI RH/LH PDF
STEP
QS with Plain Head - 6" Class 125 ANSI Opposite PDF
STEP
QS with Relief Valve - 6" Class 150 ANSI Opposite PDF
STEP