The 4624C Series™ internal gear pump has been constructed with hardened parts in key wear areas making it a reliable pumping solution in abrasive applications. This pump is a great choice for liquids with concentrations of small but hard particles, such as paints, inks and pigments; filled polyols and resins; and waste oils. It can handle flows up to 182 GPM (41 m³/h.
Funktioner och fördelar
- The grease-filled bracket helps to prevent air and moisture from reaching the seal faces, which helps limit crystallization of some air or water-reactive liquids
- Ultra-hard tungsten carbide idler pin and tungsten carbide idler bushing minimize wear in this key area, since a constant supply of abrasive material is flowing through the pumping elements
- U-Plus™ Bracket comes standard with stainless steel window guards that offer protection from rotating parts
- Optional ProPort™ Casing adaptable port design offers a variety of port sizes and types, enabling flexibility when connecting pumps to piping
Kapacitet
5 to 182 GPM
1.1 to 41 m³/h
Viskositet
38 to 25,000 SSU
3.5 to 55,000 cSt
Tryck
150 PSI
10 BAR
Temperatur
0 to +300°F
-15 to +150°C
Alternativ
Portar
Drift
Montering
Tätningar
Specifikationer
| Model | Standard Port Size | Nominal Pump Rating (GPM) | Nominal Pump Rating ( m³/h) | Maximum RPM | Maximum Pressure PSI | Maximum Pressure BAR |
|---|---|---|---|---|---|---|
| H4624C | 1.5 in | 5 GPM | 1.1 m³/h | 640 RPM | 400 PSI | 28 BAR |
| HL4624C | 1.5 in | 10 GPM | 2.2 m³/h | 640 RPM | 400 PSI | 28 BAR |
| K4624C | 2 in | 25 GPM | 5.6 m³/h | 280 RPM | 400 PSI | 28 BAR |
| KK4624C | 2 in | 35 GPM | 8 m³/h | 280 RPM | 400 PSI | 28 BAR |
| L4624C | 2 in | 50 GPM | 11 m³/h | 230 RPM | 400 PSI | 28 BAR |
| LL4624C | 3 in | 65 GPM | 15 m³/h | 230 RPM | 300 PSI | 21 BAR |
| LS4624C | 3 in | 72 GPM | 16 m³/h | 230 RPM | 300 PSI | 21 BAR |
| Q4624C | 3 in | 110 GPM | 25 m³/h | 190 RPM | 250 PSI | 17 BAR |
| QS4624C | 6 in | 182 GPM | 41 m³/h | 190 RPM | 250 PSI | 17 BAR |
Videos
Färger
Färger är skjuvkänsliga vätskor som kan innehålla en mängd olika lösningsmedel och pigmentkoncentrationer som medför problem med slipande slitage och kemisk kompatibilitet.
Bläck
Bläck för flexibla förpackningar är skjuvkänsliga vätskor som kan innehålla en mängd olika lösningsmedel, vaxer, ytaktiva ämnen och halvfasta hartspartiklar samt pigmentkoncentrationer som medför problem med nötning och kemisk kompatibilitet.
Polyol
Alkoholer med många hydroxylradikaler kallas polyoler. Många företag marknadsför polyoler under sina egna handelsnamn. Produktens viskositet varierar kraftigt beroende på den specifika polyolen, men kan vara så tjock som 40.000 cP. Polyoler blandas ofta med isocyanater, så pumpar som hanterar polyoler måste ofta byggas med smörjmedel som är kompatibla med isocyanater.
hartser
Hartser är vätskor med hög viskositet och potentiellt skjuvkänsliga (förtunnande) komponenter, som består av lösningsmedel, vaxer, ytaktiva ämnen och halvfasta hartspartiklar, alla med olika kemiska kompatibilitetsproblem. Dessa hartser kan användas i polyuretaner, epoxier och andra lim. I vissa fall innehåller hartserna pigment som medför problem med abrasivt slitage.
-
DRAWINGS
H-HL with Plain Head - 1.5" NPT RH/LH PDF
STEP
H-HL with ProPort Casing - 1.5" Class 125 ANSI RH/LH PDF
STEP
H-HL with ProPort Casing - 1.5" Class 250 ANSI RH/LH PDF
STEP
H-HL with ProPort Casing - 1.5" NPT RH/LH PDF
STEP
H-HL with ProPort Casing - 2" Class 150 ANSI RH/LH PDF
STEP
H-HL with ProPort Casing - 2" Class 300 ANSI RH/LH PDF
STEP
H-HL with Relief Valve - 1.5" NPT RH/LH PDF
STEP
H-HL with RV and ProPort Casing - 1.5" Class 125 ANSI RH/LH PDF
STEP
H-HL with RV and ProPort Casing - 1.5" Class 250 ANSI RH/LH PDF
STEP
H-HL with RV and ProPort Casing - 1.5" NPT RH/LH PDF
STEP
H-HL with RV and ProPort Casing - 2" Class 150 ANSI RH/LH PDF
STEP
H-HL with RV and ProPort Casing - 2" Class 300 ANSI RH/LH PDF
STEP
K-KK with Plain Head - 2" NPT RH/LH PDF
STEP
K-KK with Plain Head - 4" Class 125 ANSI RH/LH PDF
STEP
K-KK with ProPort Casing - 2" Class 125 ANSI RH/LH PDF
STEP
K-KK with ProPort Casing - 2" Class 250 ANSI RH/LH PDF
STEP
K-KK with ProPort Casing - 2" NPT RH/LH PDF
STEP
K-KK with ProPort Casing - 3" Class 150 ANSI RH/LH PDF
STEP
K-KK with ProPort Casing - 3" Class 300 ANSI RH/LH PDF
STEP
K-KK with Relief Valve - 2" NPT RH/LH PDF
STEP
K-KK with Relief Valve - 4" Class 125 ANSI RH/LH PDF
STEP
K-KK with RV and ProPort Casing - 2" Class 125 ANSI RH/LH PDF
STEP
K-KK with RV and ProPort Casing - 2" Class 250 ANSI RH/LH PDF
STEP
K-KK with RV and ProPort Casing - 3" Class 150 ANSI RH/LH PDF
STEP
K-KK with RV and ProPort Casing - 3" Class 300 ANSI RH/LH PDF
STEP
L with Plain Head - 2" NPT RH/LH PDF
STEP
L with ProPort Casing - 2" NPT RH/LH PDF
STEP
L with ProPort Casing - 2.5" Class 125 ANSI RH/LH PDF
STEP
L with ProPort Casing - 2.5" Class 250 ANSI RH/LH PDF
STEP
L with ProPort Casing - 3" Class 125 ANSI RH/LH PDF
STEP
L with ProPort Casing - 3" Class 250 ANSI RH/LH PDF
STEP
L with ProPort Casing - 4" Class 150 ANSI RH/LH PDF
STEP
L with ProPort Casing - 4" Class 300 ANSI RH/LH PDF
STEP
L with Relief Valve - 2" NPT RH/LH PDF
STEP
L with RV and ProPort Casing - 2" NPT RH/LH PDF
STEP
L with RV and ProPort Casing - 2.5" Class 125 ANSI RH/LH PDF
STEP
L with RV and ProPort Casing - 2.5" Class 250 ANSI RH/LH PDF
STEP
L with RV and ProPort Casing - 3" Class 125 ANSI RH/LH PDF
STEP
L with RV and ProPort Casing - 3" Class 300 ANSI RH/LH PDF
STEP
L with RV and ProPort Casing - 4" Class 150 ANSI RH/LH PDF
STEP
L with RV and ProPort Casing - 4" Class 300 ANSI RH/LH PDF
STEP
LL with Plain Head - 3" Class 125 ANSI RH/LH PDF
STEP
LL with ProPort Casing - 3" Class 125 ANSI RH/LH PDF
STEP
LL with ProPort Casing - 3" Class 250 ANSI RH/LH PDF
STEP
LL with ProPort Casing - 4" Class 300 ANSI RH/LH PDF
STEP
LL with Relief Valve - 3" Class 125 ANSI RH/LH PDF
STEP
LL with RV and ProPort Casing - 3" Class 125 ANSI RH/LH PDF
STEP
LL with RV and ProPort Casing - 3" Class 250 ANSI RH/LH PDF
STEP
LL with RV and ProPort Casing - 4" Class 300 ANSI RH/LH PDF
STEP
LS with Plain Head - 3" Class 125 ANSI RH/LH PDF
STEP
LS with ProPort Casing - 3" Class 125 ANSI RH/LH PDF
STEP
LS with ProPort Casing - 3" Class 250 ANSI RH/LH PDF
STEP
LS with ProPort Casing - 4" Class 150 ANSI RH/LH PDF
STEP
LS with ProPort Casing - 4" Class 300 ANSI RH/LH PDF
STEP
LS with Relief Valve - 3" Class 125 ANSI RH/LH PDF
STEP
LS with RV and ProPort Casing - 3" Class 125 ANSI RH/LH PDF
STEP
LS with RV and ProPort Casing - 3" Class 250 ANSI RH/LH PDF
STEP
LS with RV and ProPort Casing - 4" Class 150 ANSI RH/LH PDF
STEP
LS with RV and ProPort Casing - 4" Class 300 ANSI RH/LH PDF
STEP
Q with Plain Head - 4" Class 125 ANSI RH/LH PDF
STEP
Q with ProPort Casing - 4" Class 125 ANSI RH/LH PDF
STEP
Q with ProPort Casing - 4" Class 250 ANSI RH/LH PDF
STEP
Q with Relief Valve - 4" Class 125 ANSI RH/LH PDF
STEP
Q with RV and ProPort Casing - 4" Class 125 ANSI RH/LH PDF
STEP
Q with RV and ProPort Casing - 4" Class 250 ANSI RH/LH PDF
STEP
QS with Plain Head - 6" Class 125 ANSI Opposite PDF
STEP
QS with Relief Valve - 6" Class 125 ANSI Opposite PDF
STEP
One Pump. Endless Configurations. Zero Compromises.
Viking's Next Generation Universal pumps use modular design to give you more options with fewer parts reducing your inventory complexity.
Viking Pump's U-Plus™ Bracket
-
Accepts a variety of seal types to meet your needs
-
Stainless steel window guards offer protection from rotating parts
-
Footed one-piece iron bracket provides rigid mounting to help maintain alignment, which extends seal and bearing life
Viking Pump's ProPort™ Casing
-
Adaptable port design offers a variety of port sizes and types, simplifying integration into existing piping systems and enhances installation efficiency
-
H-Q sizes available with optional opposite porting
-
Casing drain allows the pump to be drained without removing the head
-
Optional O-ring joint seals for high pressure of difficult to seal applications