|
Spur Gear Series External Gear Pumps
Spur Gear Single Pump
| Performance
Range |
| Capacity |
0 - 6 m3/hr |
0 - 32 GPM |
| Pressure |
0 - 34 Bar |
0 - 500 PSI |
| Viscosity |
1 - 16,500 cSt |
28 - 75,000 SSU |
| Temperature |
-40° - 230° C |
-40° - 450° F |
Spur Gear Double Pump
Design Features
Viking's Spur Gear series pumps are ideal for low-capacity,
high-pressure, motor-speed applications. All pumps increase by
capacities of 40%, so there is always a pump within 20% of your capacity
needs.
These pumps offer lips seals, mechanical seals or
Mag
Drive® options. They are available with foot mount,
C-flange motor mount or four-bolt motor mount (lip seal only).
Integral pressure relief valves are standard on single pumps, not
available on double pumps.
Double pumps offer two independent pumping units operated from a single
power source to reduce equipment costs. These may be used to pump
from one fluid source to two applications, two fluids to two applications,
or for proportioning two fluids together. Standard pumps do allow
some mixing within the pump, but optional seals are available to prevent
mixing if needed.
Some models are available with optional UL listing for Fuel Oil, for
use in the assembly of power-operated oil burners or for use as
oil-transfer pumps for No. 6 or lighter fuel oil (Series SG-05, sizes 0518
- 0528)
Material of Construction Options
- Cast Iron
- Ductile Iron (SG-05 and -07 series)
Specifications
Click on either Single or Double below to view
options.
|
